Specification
*for Xypex Concentrate TDS and SDS please contact Danterr via 1800 262 383 sales@danterr.com
| Product Code | Product Description |
| 107440 | Xypex Concentrate 10Kg |
| 106219 | Xypex Concentrate 20Kg |
Concentrate
Concentrate
Product: Xypex Concentrate
Product Description: XYPEX CONCENTRATE is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete, either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs. Xypex concentrate prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.
Benefits
- Resists extreme hydrostatic pressure from either a positive or negative surface of the concrete slab
- Chloride protection in the marine environment
- Becomes an integral part of the substrate
- Can seal hairline cracks up to 0.4 mm
- Allows the concrete to breathe
- Highly resistant to aggressive chemicals
- Non-toxic
- Does not require a dry surface
- Cannot puncture, tear or come apart at the seams
- No costly surface priming or levelling prior to application
- Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
- Can be applied to the positive or the negative side of the concrete surface
- Does not require protection during backfilling or during placement of steel, wire mesh or other materials
- Less costly to apply than most other methods
- Not subject to deterioration
- Permanent
- AS/NZS 4020:2005, Testing of products for use in contact with Drinking Water
